User’s Manual 9-11
Optional Devices
2. Press gently to ensure a firm connection.
Figure 9-9 Inserting a MultiMediaCard
Removing a MultiMediaCard
To remove a MultiMediaCard, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to MultiMediaCard and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
Figure 9-10 Removing a MultiMediaCard
MultiMediaCard
Bridge media slot
Make sure the MultiMediaCard is oriented properly before you insert it.
MultiMediaCard
Bridge media slot
■ Make sure the Bridge media slot indicator is out before you remove
the MultiMediaCard or turn off the computer’s power. If you remove the
MultiMediaCard or turn off the power while the computer is accessing
the MultiMediaCard you may lose data or damage the card.
■ Do not remove a MultiMediaCard while the computer is in Standby or
Hibernation mode. The computer could become unstable or data in the
MultiMediaCard could be lost.
To Next Page
Loading...
Need help?
General