Remote control
Preparation before operating the
air conditioner
Insert the battery
Remove the cover
and insert AAA
alkaline dry batteries
1
Insert direction of
(+) and (-) correctly
Pull the cover to
your side firmly
Press the CLOCK button
•
Adjust the clock by using the
“setting the clock” button
2
Press with the tip of pencil.
Attach the cover
3
Notes
•
The life of dry batteries is approx. 1 year in normal use.
•
Replace batteries if no sound is received from the indoor unit or there is a failure to select the desired function.
•
Replace both batteries at the same time with AAA alkaline batteries.
•
If not planning to use for one or more months,
remove the batteries to avoid failure.
Setting the clock
1
Press the CLOCK button
Press with the tip of pencil.
2
Adjust the “Day”
•
The day “SU” will appear and change to the next
day after pressing the button once.
3
Adjust the “Time”
or
•
The time changes by 1 minute when pressed
once. The time changes by ten-minute intervals
when pressed continuously.
4
Confirm “Time”
Pull the cover
away firmly.
11
To Next Page
Loading...
