39
How to set the Auto Restart
Auto Restart
This product is designed so that after a power failure, it can restart automatically in the same operating mode
as before the power failure.
The product was shipped with Auto Restart function in the off position. Turn it on as required.
3 seconds
1 Press and hold the Temporary switch on the indoor unit for 3 seconds to set the operation
(3 “Pi” sounds and OPERATION lamp blinks 5 times/sec for 5 seconds).
2 Press and hold the Temporary switch on the indoor unit for 3 seconds to cancel the operation
(3 “Pi” sounds but OPERATION lamp does not blink).
•
In case the ON timer or OFF timer is set, AUTO RESTART OPERATION does not activate.
To Next Page
Loading...
