Comfort sleep
Timer operation
The operation stops automatically at the Pre-set time.
When 1, 3, 5 and 9 hours are selected, the comfort sleep operation
begins.
The set temperature will be automatically adjusted appropriately.
However, the temperature is raised or decreased to no more than
2 degrees Celsius.
•
Every time when pressed (within 3 seconds)...
※ Display example is when 10:00 is selected.
Cancel
comfort sleep
Timer off during comfort sleep
•
The time for stopping the operation is displayed on the remote control.
•
After the operation stops, drying of the inside is not performed.
•
Comfort sleep operation cannot be set up when Plasma purifier functions are operating
independently.
To cancel
※ The timer setting is released but operation
continues.
or
Timer lamp illuminates
20
To Next Page
Loading...
