Toshiba RAS-M18SAH-E - Outdoor Unit

– 55 –
P.C.board
support
Connector
Side cabinet
Back cabinet
RemarksNo.
•
‚
ƒ
Part name
Common
procedure
Back cabinet
Side cabinet
P.C. board
assembly
(For outdoor unit)
Procedure
1) After stopping the operation of the air conditioner, be
sure to turn off main power supply switch and
breaker of outdoor unit and indoor unit.
2) Remove the electric parts cover. (4 screws)
3) Remove the cord clamps (6 screws).
4) Remove the connecting cables and the power cord
after loosening 7 screws of terminal block.
5) Remove the front cabinet. (8 screws)
• Pull the front lower portion toward you, and remove
it pulling out upward.
1) Remove the back cabinet and side cabinet.
(12 screws)
1) Remove the connector. (16 portions)
2) Remove the P.C. board supports (4 portions), and
take out the P.C. board assembly.
10-3. Outdoor Unit
RAS-M18SAH-E