RemarksProcedure
1) Perform the process •, ‚ above.
2) Remove the base plate (Right). (3 screws)
3) Remove the drain guide. (2 screws)
4) Remove the base plate (Left). (2 screws)
1) Remove the back cabinet and side cabinet.
(6 screws)
1) Remove the connector. (16 portions)
2) Remove the P.C. board supports (4 portions), and
take out the P.C. board assembly.
No.
ƒ
ƒ-1
ƒ-2
Part name
Lower unit
Back cabinet
Side cabinet
P.C. board
assembly
(For outdoor unit)
To Next Page
Loading...
