4 Replacement Procedures 4.26 Fluorescent lamp
2. Turn the backlight unit face down and install a new lamp unit (R) on the P-chassis.
P-chassis
(R) Lamp unit
Figure 4-140 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (12)
NOTE: When install the lamp unit, be careful not to bend or damage the reflection sheet.
Z
Z
Cross-section drawing of Z-Z
Install the lead wire into this groove.
Install the reflection sheet as it is placed
inside the reflector.
Install the lamp unit without floating.
Figure 4-141 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (13)
4-140 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
