4.10 Cooling Module 4 Replacement Procedures
4.10 Cooling Module
CAUTION: When removing the cooling module, keep the following in mind:
1. The cooling module can become very hot during operation. Be sure to let it cool down
before starting the repair work.
2. Do not touch or give shock to the fan in the cooling module.
Removing the Cooling Module
NOTE: The screws for Steps 2 and 3 cannot be removed, only loosened.
Remove the cooling module according to the following procedures and Figure 4-24.
1. Disconnect the cable of the cooling module from CN14 on the system board.
2. Release the one screw next to the fan.
3. Release the four screws on the cooling module using the numbered order shown to
the screw.
4. Remove the cooling module.
Figure 4-24 Removing the cooling module
Satellite A60/ Pro A60 Maintenance Manual 4-37
To Next Page
Loading...
