Toshiba Satellite A60 - Installing the Display Mask

4 Replacement Procedures 4.14 Display Mask
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-32.
1. Place the display mask in the correct position and fasten the following 18 latches, in
that order:
- Six top latches
- Five latches on each of the left and right sides
- Four bottom latches
2. Place the display module in the correct position and fasten the following 8 screws, in
that order:
- Four M2.5x4.5 black flat-head screws on the top and bottom
- Four M2x7 black flat-head screws on each of the top and bottom of left and right
sides
3. Place the display mask in the correct position and fasten the following 8 seals, in that
order:
- Four black seals on the bottom
- Four black seals on the top
4-48 Satellite A60/ Pro A60 Maintenance Manual