4 Replacement Procedures 4.15 FL Inverter Board
Figure 4-34 disconnecting the cables
Installing the FL Inverter Board
Install the FL inverter board according to the following procedures and Figures 4-33 and 4-
34.
1. Connect the LCD/FL cable to LCD/FL connecter, and connect the HV cable to HV
connecter.
2. Place the FL inverter board in the correct position.
3. Fasten the M2.5x4.5 black flat-head screw to secure the FL inverter board.
4-50 Satellite A60/ Pro A60 Maintenance Manual
To Next Page
Loading...
