User Programming
Feature Codes
Strata CIX and CTX IPT/DKT Telephone 12/05 113
Speed Dial (Storing an SD number)
Station
2
#66 + nnn + Phone No.
3
+ #
nnn = 100~199 SD bin numbers
System
2
#66 + nnn + Phone No.
3
+ #
nnn = 200~999 SD bin numbers
Speed Dial (Dialing a stored SD number)
Station
2
Spdial
4
+ nnn
nnn = 100~199 Station SD bin numbers
System
2
Spdial
4
+ nnn
nnn = 200~999 System SD bin numbers
Start Application
#18
Travelling Class Override
Enter Code
#471
, then dial number (enter LCR code if required)
Change Code
#69
+ Index Number + old Code + # + new Code + #
Uniform Call Distribution
Login from Agent Station
#6061
Logout from Agent Station
#6062
Login to Agent Station–another Station
#6161
Logout to Agent Station—another Station
#6162
User Programming Mode
#9876
Voice Mail (VM)
Direct Transfer to Voice Mail
While on a call, press Cnf/Trn + #407. Dial VM mailbox
number (usually Ext. Number) +
#.
Volume Control - Beep
With handset off-hook, press #6101. Press Vol or .
Volume Control - Ringing
With handset on-hook, press #6102. Press Vol or .
1. If you have “hot dialing,” you do not need to press Ext. button as part of the sequence.
2. Stations must be assigned/enabled SD capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
3. Refer to Table 7 on page 70 to see how to enter
*
and # into a speed dial number.
4. If your telephone does not have a Spdial button, press the
*
button, then dial the three digit Speed
Dial bin number (nnn).
Table 14 Feature Access Codes (continued)
Feature
Feature Access Code Sequences
1
To Next Page
Loading...
