My Phone Manager
Telephone Settings
136
DKT Phone Setting
From the Program
Menu, click Telephone
Settings > DKT Phone
Setting tab.The DKT
Phone Settings screen
displays (shown right).
Table 18 DKT Phone Settings
FIELD DESCRIPTION
Tone Ring/Voice
Announce
When an internal telephone calls your telephone, your telephone can
be set to ring continuously until answered (tone ringing) or ring once
and then go to the voice announce mode. In the voice announce
mode, the calling telephone can talk to you directly through your
telephone speaker and you can talk back through your telephone
microphone. Set your telephone to receive internal calls with Tone
Ringing or Voice Announce signaling.
Note: If set to Voice Announce, callers will be able to monitor the
noise or conversation in the vicinity of your telephone.
Possible values: Tone or Voice (default = Voice Announce).
Service personnel only: For each iES32 PDN, set to 'Tone Ringing', if
set to 'Voice Announce' iES32 will not answer.
Strata CIX and CTX IPT/DKT Telephone 12/05
To Next Page
Loading...
Need help?
General