My Phone Manager
Telephone Settings
Strata CIX and CTX IPT/DKT Telephone 12/05 135
Table 17 Advanced Telephone Settings
FIELD DESCRIPTION
Automatic Busy
Redial (ABR)
Attempts
Enter the number of times your telephone should try calling a busy
number.
When you call a busy telephone number, you can set ABR on your
telephone and your telephone will automatically redial the number
and check if it is still busy. If it is still busy your telephone will continue
to redial periodically. If the number is not busy, your telephone will
beep to notify you that the call was made successfully.
Possible values: 2~20 (default = 15)
Time Between
ABR Attempts
Select the amount of time (in seconds) ABR waits between dialing
attempts.
Possible values: 30~180 (default = 60)
Time to Answer
ABR Call
Select the number of seconds ABR will call back (beep) your
telephone to notify you the called number is not busy and is ringing.
Possible values: 5~60 (default = 20)
Hold Recall Time When you place a call on Hold the call can recall (beep) your
telephone as a reminder that it is on Hold. Select the number of
seconds that a call should remain on Hold before it recalls your
telephone.
Possible values: 0~255 (default = 60). 0 prevents Held calls from
recalling your telephone.
Transfer Recall
Time
When you transfer a call, the call will recall your telephone if it is not
answered within a specified number of seconds. Enter the number of
seconds that transferred calls should ring the transferred-to-station
before it recalls your telephone.
Possible values: 1~600 (default = 32 seconds)
To Next Page
Loading...
