Direct Station Selection Buttons (Hotline)
This optional feature enables you to use a DSS button to connect directly to another
stationís line extension. The DSS LED shows the status (idle/busy) of the station and/
or the stationís primary extension. For example, a stationís DSS button LED shows
busy (light steady red) when the station is:
• busy on a call on any button
• idle but all appearances of the stationís extension are in use by other stations.
When the station is in DND, the LED flashes red.
To connect directly to another stationís extension
1. When connected to a line or another station, press DSS.
The original party is put on-hold. You can call a station even if the DSS LED
shows busy (steady red).
2. Announce the call...or transfer the call by hanging up or pressing Release.
Note You can transfer the call to an idle or busy station.
Advanced Operation
Direct Station Selection Buttons (Hotline)
57
Strata CIX and CTX IPT/DKT Telephone 12/05