Toshiba TECRA M11 Series - Page 305

4 Replacement Procedures 4.3 ExperssCard/Bridge media/Smart card
4-14 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
4.3.2 Bridge media (SD/SDHC memory card, miniSD/microSD Card, Memory
Stick (PRO/PRO Duo), xD-PictureCard and MultiMediaCard)
Removing the Bridge media
To remove the Bridge media, follow the steps below and refer to Figure 4-3.
CAUTION: Insert or remove a Bridge media in accordance with any instructions in each
Bridge Media manual or the manuals of the computer system you are using.
1. Push the Bridge media. It will pop out partly when you release, so pull out the card.
(For an instance, SD card is described in the Figure 4-3.)
Figure 4-3 Removing the Bridge media
Installing the Bridge media
To install the Bridge media, follow the steps below and refer to Figure 4-3.
1. Insert the Bridge media and press it until it is securely connected.
Bridge media
(SD card)