4.3 ExperssCard/Bridge media/Smart card 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-15
4.3.3 Smart Card
Removing the Smart Card
To remove the Smart Card, follow the steps below and refer to Figure 4-4.
CAUTION: Insert or remove a Smart Card in accordance with any instructions in the
Smart Card manual or the manuals of the computer system you are using.
1. Grasp the Smart Card and remove it.
Figure 4-4 Removing the Smart Card
Installing the Smart Card
To install the Smart Card, follow the steps below and refer to Figure 4-4.
1. Insert the Smart Card into the card slot with the metal connectors facing up.
2. Push it carefully to ensure a firm connection.
Smart Card
To Next Page
Loading...
