Toshiba TECRA M11 Series - Page 333

4 Replacement Procedures 4.12 Cover assembly and Base assembly
4-42 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
3. Remove the following screws.
• M2.5×8B FLAT HEAD screw ×11 (“8” in the figure below)
• M2.5×12B FLAT HEAD screw ×1 (“12” in the figure below)
• M2.5×5B FLAT HEAD screw ×1 (“5” in the figure below)
Figure 4-23 Removing the cover assembly and base assembly (2)
“8”
“8”
“8”
“8”
“8”
“8”
“8”
“8”
“8”
“8”
“8”
“5”
“12”