4.22 Touch pad/Fingerprint sensor board 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-85
4. Turn up the insulator (TPAD LOW INSULATOR) and remove the following screws.
• M2.0×3C S-THIN HEAD screw ×4
5. Remove the touch pad plate (with the fingerprint sensor board).
Figure 4-47 Removing the touch pad (2)
M2.0x3C S-THIN HEAD
Insulator
(TPAD LOW INSULATOR)
M2.0x3C S-THIN HEAD
Touch pad plate
To Next Page
Loading...
