Toshiba TECRA M11 Series - Page 377

4 Replacement Procedures 4.22 Touch pad/Fingerprint sensor board
4-86 「 CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
6. Remove the following screws and separate the fingerprint sensor board and touch
pad plate.
• M2.0×3C S-THIN HEAD screw ×2
Figure 4-48 Removing the fingerprint sensor board
Fingerprint sensor board
Touch pad plate
M2.0x3C S-THIN HEAD
M2.0x3C S-THIN HEAD