Toshiba TS1000 - Page 22

– 21 –
STE 71282
STARTUP MANUAL
[8] Press the SPEED key to change
the guide speed, then move the
robot in the plus (+) and minus (–)
directions by means of the
+X
+1
and
–X
–1
keys.
[9] Press the REMOTE key to change
the guidance mode to "INCHING",
and move the robot by inching,
using the
+X
+1
and
–X
–1
keys.
[10] Move the axis 2 by means of the
+Y
+2
and
–Y
–2
keys.
[11] Move the axis 3 by means of the
+Z
+3
and
–Z
–3
keys.
–1
+1
–2
+2
–3
+3