22
Chapter 4
Set Up Internet Connections
Tips:
1. If your Internet connection type is Bigpond Cable, please go to Advanced > Network > Internet.
2. If you use Dynamic IP and PPPoE and you are provided any other parameters that are not required on the page,
please go to Advanced > Network > Internet to complete the configuration.
3. If you still cannot connect to the Internet, refer to FAQ for further instructions.
4. 3. Setting Up an IPv6 Internet Connection
Your ISP provides information about one of the following Internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
1. Visit http://tplinkwifi.net, then log in with the password you set for the router.
2. Go to Advanced > IPv6 to log into the configuration page.
To Next Page
Loading...
