73
Chapter 12
Administrate Your Network
• Enable CWMP - Toggle On to enable the CWMP (CPE WAN Management Protocol)
feature.
• Inform - Enable this feature to send an Inform message to the ACS (Auto Configuration
Server) periodically.
• Inform Interval - Enter the time in seconds when the Inform message will be sent to
the ACS.
• ACS URL - Enter the web address of the ACS which is provided by your ISP.
• ACS Username/Password - Enter the username/password to log in to the ACS server.
• Interface used by TR-069 client - Select which interface to be used by the TR-069
client.
• Display SOAP messages on serial console - Toggle to enable or disable this feature.
• Connection Request Authentication - Select this checkbox to enable authentication
for the connection request.
• Connection Request Username/Password - Enter the username/password for the
ACS server to log in to the router.
To Next Page
Loading...
