EasyManuals Logo

TP-Link Archer VR600 User Manual

TP-Link Archer VR600
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
80
Chapter 14
Specify Your Network Settings
14. 2. 1. Configure the RADVD Address Type
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Network > LAN Settings.
3. Select IPv6 to configure IPv6 LAN parameters.
1 ) Select the RADVD address type to make the modem router assign IPv6 address
prefixes to hosts.
Note:
Do not select the Enable RDNSS and Enable ULA Prefix check boxes unless required by your ISP. Otherwise
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
2 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select Static and enter the prefix.
3 ) Keep Prefix Delegated WAN Connection as the default value.
4. Click Save to make the settings effective.
14. 2. 2. Configure the DHCPv6 Server Address Type
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Network > LAN Settings.
3. Select IPv6 to configure IPv6 LAN parameters.

Table of Contents

Other manuals for TP-Link Archer VR600

Questions and Answers:

TP-Link Archer VR600 Specifications

General IconGeneral
Ethernet WANYes
SIM card slotNo
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
WLAN data transfer rate (second band)300 Mbit/s
Output current2 A
Output voltage12 V
Power source typeAC
Antennas quantity3
Antenna gain level (max)23 dBi
VPN supportPPTP, L2TP, IPSec Passthrough
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2
Supported network protocolsIPv4, IPv6
RJ-11 ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports4
Product typeTabletop router
Product colorBlack, Silver
LED indicatorsLAN, Power, WLAN
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45), Phone (RJ-11)
CertificationCE, FCC, RCM, RoHS
Package depth240 mm
Package width318 mm
Package height71 mm
Package weight1160 g
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth163.8 mm
Width215.8 mm
Height37.3 mm

Related product manuals