Name: TP-Link CPE Series
Brand: TP-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

AQ (Frequently Asked

Questions)

Q1.

How to restore the CPE to its factory default

settings?

ith the CPE powered on, press and hold the 'RESET' button of the

CPE or the 'Remote Reset' button of the passive PoE adapter for about

8 seconds until the Wireless Signal Strength LEDs ash.

RESET Button

Press & hold for about 8 seconds

Remote Reset Button

Press & hold for about 8 seconds

ethod 1:

Method 2:

Other manuals for TP-Link CPE Series

Questions and Answers:

Need help?

Do you have a question about the TP-Link CPE Series and is the answer not in the manual?

General

Model	CPE Series
Wireless Standards	IEEE 802.11a/n
Frequency	5 GHz
Antenna	Directional
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK
Operating Modes	Access Point, Client, Repeater, Bridge
Power Supply	Passive PoE (Power over Ethernet)
Operating Temperature	-30°C to 70°C
Storage Temperature	-40°C~70°C (-40℉~158℉)
Humidity	10%~90% non-condensing
Enclosure	Weatherproof design
Chipset	Atheros
RAM	Varies by Model
Flash Memory	Varies by Model
Ethernet Ports	1