4
Chapter 1
Get to Know Your Router
LED Explanation
Name Status Indication
(Power)
On The system has started up successfully.
Flashing
The system is starting up or the router is updating the firmware.
Do not disconnect or power off your router.
Off Power is off.
(2.4GHz Wireless)
On The 2.4GHz wireless band is enabled.
Off The 2.4GHz wireless band is disabled.
(5GHz Wireless)
On The 5GHz wireless band is enabled.
Off The 5GHz wireless band is disabled.
(Internet)
On Internet service is available.
Orange On
The router’s Internet port is connected, but the internet
service is not available.
Off The router’s Internet port is unplugged.
(Ethernet)
On
At least one powered-on device is connected to the router’s
LAN port.
Off No powered-on device is connected to the router’s LAN port.
(WPS)
On/Off
Turns on when a WPS synchronization is established and
automatically turns off about 5 minutes later.
Flashing WPS connection is in progress. This may take up to 2 minutes.
(USB)
On The USB device is ready to use.
Flashing
A new USB device is being identified, or data is being
transferred.
Off No USB device is plugged into the USB port.
To Next Page
Loading...
