TP-Link EC330-G5u - Specify Wireless Settings; Change Basic Wireless Settings

76
Chapter 11 Customize Your Network Settings
11. 7. Specify Wireless Settings
11. 7. 1. Change Basic Wireless Settings
The router’s wireless network name (SSID) and password, and security option are
preset in the factory. The preset SSID and password can be found on the product label.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with the password you set for the router.
¾ To enable or disable the wireless function:
1. Go to Basic > Wireless.
2. The wireless radio is enabled by default. If you want to disable the wireless function
of the router, just clear the Enable check boxes. In this case, all the wireless settings
will be invalid.
Tips:
You can also go to Advanced > Wireless > Wireless Settings to disable the corresponding wireless function through the
2.4GHz and 5GHz setting options in the Wireless Settings section.
¾ To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless.
2. Enter a new SSID in the Network Name (SSID) field and a new password in the
Password field. Both fields are case-sensitive.
Note:
If you use a wireless device to change the wireless settings, you will be disconnected after the new settings are effective.
Please write down the new SSID and password for future use.
¾ To hide SSID:
1. Go to Basic > Wireless.
2. Select the Hide SSID check box, and your SSID will not be broadcast. Your SSID
won’t display on your wireless device when you scan for local wireless networks
and you need to manually join the network.
¾ To change the mode or channel:
1. Go to Advanced > Wireless > Wireless Settings.
2. Select the wireless network 2.4GHz or 5GHz.