94
Chapter 12
Manage Your Router
3. Enter the old password and a new password twice (both case-sensitive).
4. Click Save to make the settings effective.
12. 7. 2. Local Management
You can control the local devices’ authority to manage the router via Local Management
feature. By default all local connected devices are allowed to manage the router. You
can also specify one device to manage the router and enable local management over
a more secure way, HTTPS.
Follow the steps below to allow only the specific device to manage the router via the
local management over HTTPS.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System Tools > Administration page, and locate the Local
Management section.
3. Keep the Port for HTTP and Port for HTTPS as the default settings. Enable Local
Management via HTTPS, and enter the IP address or MAC address of the local
device to manage the router.
4. Click Save.
Now, you can manage the router over both HTTP (http://tplinkwifi.net) and HTTPS
(https://tplinkwifi.net).
To Next Page
Loading...
