93
Chapter 12
Manage Your Router
¾ To schedule the router to reboot at a specific time:
1. Enable Auto Reboot.
2. Specify the Time when the router reboots and the Auto Reboot Interval to decide
how often it reboots.
3. Click Save to make the settings effective.
Some settings of the router may take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Operation Mode.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
Note:
The Auto Reboot feature takes effect based on the router’s system time. Please make sure you have already set the time
of the router.
12. 7. Administration Management
12. 7. 1. Change the Login Password
A login password is required to log in to the router’s web management page. You are
asked to set a login password at the first login. You can change it with the account
management feature.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System Tools > Administration, and locate the Account
Management section.
To Next Page
Loading...
