90
Chapter 12
Manage Your Router
¾ To run ping and traceroute tools:
1 ) Locate the Ping & Tracerroute section.
2 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity.
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an internet
Protocol network.
3 ) Enter the Target IP Address/Domain Name of the tested host. You can change
the default test options if necessary.
4 ) Click Start to begin the diagnostics, and you will find the test results in the gray
box.
To Next Page
Loading...
