Figure 5-15 Dynamic Address
The following entries are displayed on this screen:
¾ Aging Config
Auto Aging: Allows you to Enable/Disable the Auto Aging feature.
Aging Time: Enter the Aging Time for the dynamic address.
¾ Search Option
Search Option: Select a Search Option from the pull-down list and click the Search
button to find your desired entry in the Dynamic Address Table.
z MAC: Enter the MAC address of your desired entry.
z VLAN ID: Enter the VLAN ID number of your desired entry.
z Port: Enter the Port number of your desired entry.
¾ Dynamic Address Table
Select: Select the entry to delete the dynamic address or to bind the MAC
51
To Next Page
Loading...
