25
For a multi-band EAP, you can click each band to enable Wireless Radio and configure
wireless parameters.
Demonstrated with 2.4GHz, the following sections introduce these contents:
2.1.1
Configure SSIDs
and
2.1.2 Configure Wireless Advanced Settings
.
2.1.1 Configure SSIDs
SSID (Service Set Identifier) is used as an identifier for a wireless LAN, and is commonly
called as the “network name“. Clients can find and access the wireless network through
the SSID. For one EAP, you can build up to eight SSIDs per frequency band.
Follow the steps below to create an SSID on the EAP:
1. If your EAP is a dual-band device, click
to choose a frequency band on
which the new SSID will be created.
To Next Page
Loading...
