TP-Link T120200-2B1 - Ipv6 Firewall

52
Chapter
8
Network Security
To bind the connected device(s):
1 ) Select the device(s) to be bound in the ARP List.
2 ) Click Bind to add to the Binding List.
To bind the unconnected device:
1 ) Click Add in the Binding List section.
2 ) Enter the MAC address and IP address that you want to
bind.
3 ) Select the Enable This Entry check box to enable the
entry and click OK.
Enjoy the internet without worrying about ARP spoofing and
ARP attacks.
8. 4. IPv6 Firewall
IPv6 Firewall protects your IPv6 network by preveting access from the internet. However,
when you are hosting a service, such as a file sharing server in your local network, you
can choose to allow access to the server from the internet by adding entries on this
page. This feature is available only when you’ve set up an IPv6 connection.
1. Visit http://tplinkmodem.net or http://192.168.254.1, and log in with the password
you set for the router.
2. Go to Advanced > Security > IPv6 Firewall.
Done!