TP-Link T120200-2B1 - Control the LED; Test Internet Connectivity

73
Chapter
10
Manage Your Router
10. 2. Control the LED
The LED of the router indicates its activities and status. You can enable the Night Mode
feature to specify a time period during which the LED is off.
1. Visit http://tplinkmodem.net or http://192.168.254.1, and log in with your TP-Link ID
or the password you set for the router.
2. Go to Advanced > System > LED Control.
3. Enable Night Mode.
4. Specify the LED off time, and the LED will be off during this period every day.
5. Click Save.
10. 3. Test Internet Connectivity
Diagnostics function is used to test the connectivity between the router and the host
or other network devices.
1. Visit http://tplinkmodem.net or http://192.168.254.1, and log in with the password
you set for the router.
2. Go to Advanced > System Tools > Diagnostics page.
¾ To test the internet connection of the router:
Locate the Diagnostic Tools section, and click the Start to test the internet connectivity
and you will find the test results in the gray box.