TD-8840T ADSL2+ Modem Router User Guide
8
Chapter 3. Quick Installation Guide
3.1 Configuring the PC
After you directly connect your PC to the Modem Router or connect your adapter to a Hub/Switch
which has connected to the Modem Router, you need to configure your PC’s IP address. Follow
the steps below to configure it.
Step 1: Click the Start menu on your desktop, right click My Network Places, and then select
Properties (shown in Figure 3-1).
Figure 3-1
Step 2: Right click Local Area Connection (LAN), and then select Properties.
To Next Page
Loading...
