TD-8840T ADSL2+ Modem Router User Guide
53
Figure 4-50
¾ Log Type: By selecting the log type, only logs of this type will be shown.
¾ Log Level: By selecting the log level, only logs of this level will be shown.
¾ Refresh: Refresh the page to show the latest log list.
¾ Clear Log: All the logs will be deleted from the Modem Router permanently, not just from the
page.
¾ Save Log: Click to save all the logs in a txt file.
¾ Log Settings: Click to set the logs in the screen (shown in Figure 4-51).
Figure 4-51
¾ Save Locally: If Save Locally is selected, events will be recorded in the local memory.
¾ Minimum Level: Select the Minimum level in the drop-down list, for the Minimum Level, all
logged events above or equal to the selected level will be displayed.
¾ Save Remotely: If Save Remotely is selected, events will be sent to the specified IP address
and UDP port of the remote system log server.
Click the Save button to save your settings.
4.14.2 Time Settings
Choose menu “System Tools” → “Time Settings”, and then you can configure the time on the
following screen.
To Next Page
Loading...
Need help?
General
