TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-84
¾ WPA2 Preauthentication: Select Enable from the drop-down list, Stations will authenticate
with the AP during the scanning process, and once association is required, the station has
been already authenticated.
¾ Network Re-auth Interval: Enter a value in seconds as the frequency interval to enable
periodic Network Re-authentication function, while leave it blank or enter “0” to disable it.
5. WPA2-Personal
To configure WPA2-Personal settings, select the WPA2- Personal option from the drop-down list.
The menu will change to offer the appropriate settings. WPA2- Personal requires a shared key
and does not use a separate server for authentication. PSK keys can be ASCII or Hex type.
Figure 4-85
6. Mixed WPA2/WPA Enterprise
To configure Mixed WPA2/WPA Enterprise settings, select the Mixed WPA2/WPA Enterprise
option from the drop-down list. The menu will change to offer the appropriate settings. The steps to
these settings are similar to those for WPA-PSK.
75
To Next Page
Loading...
