This section will introduce the configuration methods of three typical application scenarios: point-to-point, point-to-multipoint and hotspot.
Please refer to the corresponding content based on your network structure.
• Point-to-point The
point-to-point model is mainly used to establish a network connection between two wireless devices that are relatively far apart. We will
take the following figure as an example to introduce its configuration method.
Access Point configuration method
1) Log in to the web management interface
2. Typical application scenario configuration
Web camera
Client
LAN: 192.168.1.254
computer
LAN: 192.168.1.252
Access Point
10
Machine Translated by Google
To Next Page
Loading...
