TP-Link TL-SG2452 - Page 230

Configuring GVRP Configuration Example
User Guide 205
Switch_5#copy running-config startup-config
Verify the Configuration
■ Switch 1
Verify the global GVRP configuration:
Switch_1#show gvrp global
GVRP Global Status
------------------
Enabled
Verify GVRP configuration for port 1/0/1:
Switch_1#show gvrp interface
Port Status Reg-Mode LeaveAll JoinIn Leave LAG
---- ------ -------- ------- ------ ----- ---
Gi1/0/1 Enabled Fixed 1000 20 60 N/A
Gi1/0/2 Disabled Normal 1000 20 60 N/A
...
■ Switch 2
Verify the global GVRP configuration:
Switch_2#show gvrp global
GVRP Global Status
------------------
Enabled
Verify GVRP configuration for port 1/0/1:
Switch_2#show gvrp interface
Port Status Reg-Mode LeaveAll JoinIn Leave LAG
---- ------ -------- ------- ------ ----- ---
Gi1/0/1 Enabled Fixed 1000 20 60 N/A