TP-Link TL-SG2452 User Manual

User Guide 514
Configuring ARP Appendix: Default Parameters
3
Appendix: Default Parameters
Default ARP settings are listed in the following tables.
Table 3-1 Default Gratuitous Settings
Parameter Default Setting
Send on IP Interface Status Up Enabled
Send on Duplicate IP Detected Disabled
Gratuitous ARP Learning Disabled
Gratuitous ARP Periodical Send Interval 0 second

TP-Link TL-SG2452 Specifications

General

Switching Capacity	104 Gbps
Forwarding Rate	77.38 Mpps
MAC Address Table	16 K
Weight	3.5 kg
Fan Quantity	2
Mounting	Rack mountable
Jumbo Frame	9 KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Ports	48 x 10/100/1000Mbps RJ45 ports, 4 x 1G SFP slots
Dimensions (W x D x H)	440 x 220 x 44 mm
Power Supply	100-240V AC, 50/60Hz
Standards and Protocols	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
L2 Features	VLAN, Port Mirroring, Link Aggregation
VLAN	802.1Q VLAN
Security	DHCP Snooping
Management	SNMP v1/v2c/v3
Quality of Service	802.1p QoS