EasyManuals Logo

TP-Link TL-SG2452 User Manual

TP-Link TL-SG2452
961 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #762 background imageLoading...
Page #762 background image
User Guide 737
Configuring IPv4 IMPB IP-MAC Binding Configuration
2.2.2 Binding Entries via DHCP Snooping
Follow these steps to bind entries via DHCP Snooping:
Step 1 configure
Enter global configuration mode.
Step 2 ip dhcp snooping
Globally enable DHCP Snooping.
Step 3 ip dhcp snooping vlan
vlan-range
Enable DHCP Snooping on the specified VLAN.
vlan-range:
Enter the vlan range in the format of 1-3, 5.
Step 4 interface {
fastEthernet
port
|
range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range
ten-gigabitEthernet
port-list
|
interface port-channel
port-channel-id
| interface range
port-channel
port-channel-id-list
}
Enter interface configuration mode.
Step 5 ip dhcp snooping max-entries
value
Configure the maximum number of binding entries the port can learn via DHCP snooping.
value:
Enter the value of maximum number of entries. The valid values are from 0 to 512.
Step 6 show ip dhcp snooping
Verify global configuration of DHCP Snooping.
Step 7 end
Return to privileged EXEC mode.
Step 8 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable DHCP Snooping globally and on VLAN 5, and
set the maximum number of binding entries port 1/0/1 can learn via DHCP snooping as
100:
Switch#configure
Switch(config)#ip dhcp snooping
Switch(config)#ip dhcp snooping vlan 5
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#ip dhcp snooping max-entries 100
Switch(config-if)#show ip dhcp snooping
Global Status: Enable

Table of Contents

Other manuals for TP-Link TL-SG2452

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG2452 and is the answer not in the manual?

TP-Link TL-SG2452 Specifications

General IconGeneral
Switching Capacity104 Gbps
Forwarding Rate77.38 Mpps
MAC Address Table16 K
Weight3.5 kg
Fan Quantity2
MountingRack mountable
Jumbo Frame9 KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% non-condensing
Storage Humidity5% to 90% non-condensing
Ports48 x 10/100/1000Mbps RJ45 ports, 4 x 1G SFP slots
Dimensions (W x D x H)440 x 220 x 44 mm
Power Supply100-240V AC, 50/60Hz
Standards and ProtocolsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
L2 FeaturesVLAN, Port Mirroring, Link Aggregation
VLAN802.1Q VLAN
SecurityDHCP Snooping
ManagementSNMP v1/v2c/v3
Quality of Service802.1p QoS

Related product manuals