Configuring DHCP Service Configuration Examples
User Guide 475
Figure 5-15 Configuring the Routed Port
■ Configuring DHCP Interface Relay on the Relay Agent
1) Choose the menu L3 FEATURES > DHCP Service > DHCP Relay > DHCP Relay Config
to load the following page. In the Global Config section, enable DHCP Relay, and click
Apply.
Figure 5-16 Enable DHCP Relay
2) Choose the menu L3 FEATURES > DHCP Service > DHCP Relay > DHCP Interface
Relay and click to load the following page. Specify the DHCP server for the
clients in VLAN 10 and VLAN 20.
Figure 5-17 Specify DHCP Server for Interface VLAN 10
To Next Page
Loading...
