Port
¾
: Indicates switch port number.
Binding
¾
: Three options are available. A further explanation is stated below.
Number of MAC Address to Bind
¾
: Indicates the max number of MAC
addresses that one switch port can bind.
Number of Bound MAC Address
¾
: Indicates the number of MAC
addresses that already bind to a switch port.
State
¾
: Indicates the switch port state that may be binding, free port, secure
port, unplugged or "--". A further explanation is stated below.
Further explanation
Options of dynamic binding:
1) Disable: Cause this port to learn MAC address freely.
2) Enable: Cause the port to bind MAC addresses until the specied number
is reached.
3) --: This option is available only if the port is in a secure state, when this
option is selected, the port state keeps unchanged.
Port states:
1) Free Port: The binding function is disabled, and the port can learn MAC
address freely.
2) Binding: The port is in binding state, and its bound MAC address number
is still less than the max number.
3) Secure Port: The port has already bound the max number of MAC
address in dynamic binding mode, or it was set to secure port manually in
"Port Parameter" page.
4) Unplugged: The port is a SFP port and unplugged. The dynamic binding
function cannot be congured now.
To Next Page
Loading...
