10
Chapter 2
Set Up Internet Connection
and you want to have a larger effective range of the wireless signal throughout your
home or office.
Internet
WA1201’s SSIDHost AP’s SSID
B A
OR OR
TV
Other
Wired
Device
1. Connect the access point according to Step A and B in the diagram.
2. Turn on the power, and wait for about 2 minutes until the Power and Wi-Fi LEDs are lit
and stable.
3. Connect your computer to the access point via an Ethernet cable.
4. Launch a web browser and enter
http://tplinkap.net. Create a password to log in.
Note:
If the login window does not appear, please refer to the FAQ section.
5. Click Change Mode and switch to the Range Extender mode.
6. Wait until the access point reboots, then log in again.
7. Follow the step-by-step instructions to complete the configuration.
8. Relocate the access point about
halfway between your host router and the Wi-Fi
dead zone.
Tip: To maximize the signal strength, refer to the FAQ section.
To Next Page
Loading...
