46
Chapter 8 Manage Your Access Point
2 ) Specify the LED Off Time as needed, and the LEDs will be off during the period.
4. Click
SAVE.
8. 3. Configure the SNMP Agent
SNMP (Simple Network Management Protocol) is a popular network monitoring and
management protocol. You can configure the SNMP agent to communicate with your
network monitoring tool or network management system.
1. Visit
http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
System > SNMP.
3. Enable
SNMP Agent.
To Next Page
Loading...
