TP-Link TL-WA1201 - Set System Time and Language

43
Chapter 8 Manage Your Access Point
8. 1. Set the System Time and Language
System time is the time displayed while the access point is running. The system time
you configure here will be used for other time-based functions like Reboot Schedule.
You can choose the way to obtain the system time as needed.
System language is the language displayed when you log into the access point. You can
change the system language as needed.
1. Visit
http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
System > Time & Language.
3. (Optional) Enable
24-Hour Time if you want to display the time in 24-hour format.
4. Set the system time and languange according to your needs.
• To set system language:
1 ) Select the language from the dropdown list.
2 ) Click SAVE.
• To get the system time from the internet:
1 ) In the
Set Time field, select Get from Internet.
2 ) Select your local Time Zone from the drop-down list.
3 ) In the
NTP Server I field, enter the IP address or domain name of your desired
NTP Server.