11
Chapter 2
Set Up Internet Connection
Router Devices
Halfway
9. Now, connect your devices to the access point wirelessly or via an Ethernet cable,
and enjoy the internet!
2. 2. 3. Client Mode
In this mode, the access point connects your wired device to a wireless network. This
mode is suitable when you have a wired device with an Ethernet port and no wireless
capability, for example, a smart TV or game console and you want to connect it to the
internet wirelessly.
Internet
Host AP’s SSID
B
A
OR OR
TV
Other
Wired
Device
1. Connect the access point according to Step A to B in the diagram.
2. Turn on the power, and wait for about 2 minutes until the Power and Wi-Fi LEDs are lit
and stable.
3. Connect your computer to the access point via an Ethernet cable.
4. Launch a web browser and enter
http://tplinkap.net. Create a password to log in.
Note:
If the login window does not appear, please refer to the FAQ section.
To Next Page
Loading...
