41
Chapter 7
Customize Network Settings
• To specify the IP address range that the access point assigns:
1. Turn on
DHCP Server.
2. Enter the starting and ending IP addresses of the IP Address Pool.
3. Leave other parameters as the default settings.
4. Click
SAVE.
• To reserve an IP address for a specified client device:
The DHCP server of the access point works when it is turned on, or when it is in
Auto
mode with the DHCP server of the main router/AP disabled. When it is working, you can
view the DHCP clients and reserve IP addresses for them.
1. In the
Address Reservation section, click Add.
2. Click VIEW CONNECTED DEVICES and select the device you want to reserve an
IP for. The MAC Address will be automatically filled in. You can also enter the MAC
address of the client device manually.
3. Enter the IP address to reserve for the client device.
4. Click
SAVE.
To Next Page
Loading...
