6
Chapter 1
Get to Know About Your Access Point
Ports or Buttons Description
POWER Port
For connecting the access point to a power socket via the provided
power adapter.
ON/OFF Button Press this button to power on or off the access point.
Reset
Press and hold this button until the Power LED blinks to reset the
access point to its factory default settings.
WPS
Press this button and immediately press the WPS button on another
device to quickly establish a wireless connection.
Ethernet Port
For connecting an Ethernet enabled device, such as a router or
desktop.
Antennas
Used for wireless operation and data transmitting. Upright them for
the best Wi-Fi performance.
To Next Page
Loading...
