11
Note
T1. How do I restore my AP’s configuration to its factory default settings?
T2. What can I do if I forget my password?
1) Restore the AP’s configuration to its factory default settings. If you don’t know
how to do that, please refer to previous section T1;
2) Use the default user name and password: admin, admin;
3) Try to reconfigure your AP by following the instructions of this QIG.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer’s IP Address.
For Windows XP OS
With the AP powered on, press
and hold the RESET button fo
about 8 seconds before releasing
it.
Once the AP is reset, the current configuration settings will be lost and you
will need to reconfigure the router.
Go to Start > Control Panel,you
will then see the following page.
Click Network and Internet
Connections
Appendix
To Next Page
Loading...
