TP-Link TL-WA5210G - Configuration for Point-To-Point Connection

6
Click Finish
B. Configuration for Point-to-Point Connection
1)
The AP Setting
Click Finish to exit the Quick Setup
wizard and wait until the AP completes
rebooting automatically. The changes
will take effect after rebooting.
Click Finish
Enter the SSID provided
by your WISP
Click Next
Click Finish to exit the Quick Setup
wizard and wait until the AP completes
rebooting automatically. The changes
will take effect after rebooting.
Click Next
Select AP
Enter a unique name for your wireless
network; however, choose a name that
is easily remembered by network users.
Here we enter TP-LINK_900008 as the
SSID for example
Select your region from the drop-down list
Click Next
Note
Two TL-WA5210Gs are needed for this application.